Apexis Products And Technology Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Apexis Products And Technology Forum

In order to let everybody know apexis products and services, and help everybody in the use of apexis network camera products issues.
 
HomeSearchRegisterLog in

 

 How to Program Car Keys on L322

Go down 
AuthorMessage
obd2tool



Posts : 62
Join date : 2012-04-28

How to Program Car Keys on L322 Empty
PostSubject: How to Program Car Keys on L322   How to Program Car Keys on L322 I_icon_minitimeSun Mar 28, 2021 8:27 pm

How do you code a key on a Range Rover L322 vehicle?

Replacing a missing master key is quite expensive. Do not pay the extra cost of ‘Dealer Coding.’ You can do this yourself in two minutes by following the simple process below:

1. Get in and close all doors. Turn ignition on and off quickly and remove the key (all within about 5 seconds).

2. Within 30 seconds of turning the ignition off, while holding down the ‘unlock’ button, press the ‘lock’ button three times. Release the ‘unlock’ button. (You may or may not get the confirmation from the door locks.) Holding the key at your head level provides the best results as the key sensor is in the side window pillar.

3. Repeat for each key you want to initialize within 30 seconds after the last one you initialized (if you have Jaguar and Land Rover Diagnostic Tool).

4. After confirming the last key, quickly put the key back in the ignition and turn it on/off again to finalize.

https://www.obd2tool.com/category-209-b0-JLR+VCI.html
Back to top Go down
 
How to Program Car Keys on L322
Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
Apexis Products And Technology Forum :: Forum :: Apexis IP Camera-
Jump to: